valvola a pistone servoassistita a 2/2 vie

Tipo 5404 / Numero ID 177853

Stampa

The depiction of the products may differ from the actual specific design.

Elettrovalvola

valvola servoassistita a pistone con ampiezza nominale fino a DN50
Sistema a bobina sfilabile di facile sostituzione
adatto per applicazioni a gas e a vapore fino a 160°C
valvola di scarico compressore
Idonea per applicazioni con gas e vapore

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Descrizione del prodotto

La valvola 5404 servoassistita a pistone è disponibile sia nella versione NC che NO. Per la funzione di commutazione utilizzo della valvola è necessaria una pressione differenziale minima. Le bobine magnetiche sono rivestite in resina epossidica applicata a pressione. In combinazione con il connettore conforme alla normativa DIN EN 175301-803 forma A, le valvole soddisfano i requisiti del grado di protezione IP65. Il connettore non fa parte della fornitura e deve essere ordinato separatamente.

Codici prodotto: 84818079
Paese: DE

Caratteristiche tecniche

Nome	Valore	Unità
Type	5404
Operation	servo-controlled
Actuator type	Plunger valve
Main valve operating principle	Piston
Switch function	on/off
Media separation	No
Valve function	A - normally closed - inlet port 1 (P/NC)
Fluidic port connection number	2
Valve function number of switching positions	2
Valve function manual actuation	No
Flow	Above seat
Nominal pressure min	1	bar
Nominal pressure max (gas)	50	bar
Nominal pressure max (liquid)	50	bar
Main valve orifice 1 (P) (mm)	12	mm
Main valve orifice 1 (inch)	7/16 inch
Kv value (water)	2	m3/h
QNn value (gas)	2.200	l/min
Main valve wetted material	Brass
Port connection 1 type	Inner thread
Port connection 1 thread type	G
Port connection 1 thread marking	1/2
Port connection 2 type	Inner thread
Port connection 2 thread type	G
Port connection 2 thread marking	1/2
Valve seat material	Brass
Medium-contacting part core material	Stainless steel
Medium-contacting part stopper material	Stainless steel
Seat seal material category	Plastics
Seat seal material	PTFE (Polytetrafluorethylene)
Sealing toward outside material	FKM (Fluor rubber)
Temperature environment max	55	°C
Temperature medium min	-10	°C
Temperature medium max	110	°C
Voltage / rated voltage	24	V
Voltage / rated voltage	24	V
Voltage tolerance negative	10	%
Voltage tolerance positive	10	%
Voltage frequency	50	Hz
AC voltage	Yes
DC voltage	No
Battery voltage	No
Rated power DC	8	W
Reduced power DC	8	W
Rated power consumption	8	W
Electrical connection sort	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts	2 + Grounding conductor
Cable plug in delivery	not included
Electrical connection position	in direction of flow left
Protection type (IP max. with suitable connector)	IP65
Coil type	placed on top
Coil insulation material (encasement)	Epoxy
Coil size	32	mm
Coil wiring overvoltage protection	without
Coil wiring rectifier	No
Coil wiring polarity recovery diode	No
Coil special feature	for high temperatures
Thermal insulation class of the actuator	H
Nominal operation/Duty cycle	100	%
Switch time open min	20	ms
Switch time open max.	40	ms
Switch time close min	100	ms
Switch time close max.	250	ms
Valve setting opening time	No
Valve setting closing time	No
Back-pressure-resistant version	No
Vacuum version	No
Analysis version	No
Oil burner valve	No
Steam version	No
Pilot control seal material	FKM (Fluor rubber)
Low-noise version	No
Main valve with integrated screen	No
Valve construction	Valve complete
Peso	0,621000	kg

Mostra tabella completa Riduci tabella

Combinabile con:

Tipo 2518

Cable Plug Form A

Mostra tabella completa Riduci tabella

Applicazioni & Tools

Download

Schede tecniche

Descrizione	Dimens. file	Lingua / Paese
Type 5404 data sheet \| servo-assisted piston valve	2 MB	EN / EU
Type 5404 data sheet \| servo-assisted piston valve [US units]	485 kB	EN / US
Typ 5404 Datenblatt \| servogesteuertes Kolbenventil	2 MB	DE / DE

Manuali utente

Descrizione	Dimens. file	Lingua / Paese
Istruzioni d'uso Tipo AC10 \| Bobina magnetica, ATEX	1 MB	IT / IT
Operating Instructions Type 5404 \| 2/2-way solenoid valve	1 MB	EN / EU
Operating Instructions Type AC10 \| ATEX approval	1 MB	EN,FR,DE / EU
Operating Instructions Type AC10 \| Solenoid coil \| ATEX and IECEx approval \| v1.0	2 MB	EN / EU
Operating Instructions Type AC10 \| Solenoid coil \| ATEX and IECEx approval \| v2.0	1 MB	EN / EU
Bedienungsaneitung Typ AC10 \| Magnetspule \| ATEX und IECEx Zulassung \| v1.0	2 MB	DE / DE
Bedienungsanleitung Typ 5404 \| 2/2-Wege-Magnetventil	1 MB	DE / DE
Bedienungsanleitung Typ AC10 \| Magnetspule \| ATEX und IECEx Zulassung \| v2.0	1 MB	DE / DE
Manual d'utilisation Type AC10 \| Bobine magnétique \| Homologation ATEX et IECEx \| v1.0	2 MB	FR / FR
Manual d'utilisation Type AC10 \| Bobine magnétique \| Homologation ATEX et IECEx \| v2.0	1 MB	FR / FR
Manual de operação Bobina magnética tipo AC10 \| Dispositivo com homologação II 2G/D Ex	1 MB	PT / BR
Manuel d'utilisation Type 5404 \| Électrovanne 2/2 voies	1 MB	FR / FR
使用说明 5404 型 \| 2 位 2通电磁阀	2 MB	ZH / CN

Dichiarazione UE

	Descrizione	Dimens. file	Lingua / Paese
	EU-DoC\|EU Declaration	4 MB	EN,FR,DE

Flyer e cataloghi

Descrizione	Dimens. file	Lingua / Paese
	4 MB	EU
	723 kB	AF
Solenoid valves for safety in your plant	787 kB	EN / EU

Pezzi di ricambio

Posizione	N. articolo	Descrizione
01	646837	Kit bobina 24/56 8W
03	161788	Wearing Part Set Dn12 Dw Ef Wwa