Bürkert
Valvola servoassistita a membrana a 2/2 vie
Tipo 6281 / Numero ID 297885
Descrizione del prodotto
La 6281 è una valvola a membrana servoassistita. Per il corretto funzionamento della valvola è sempre necessaria una pressione differenziale minima. Sono disponibili svariate combinazioni di materiali della membrana e del corpo e funzionamenti diversi. Il corpo standard in ottone soddisfa tutti i requisiti europei in materia di acqua potabile. Per ulteriori mercati sono disponibili corpi valvola in ottone resistente alla dezincificazione e in acciaio inox. Le bobine magnetiche sono incapsulate con resina epossidica resistente agli agenti chimici. Per contenere il fabbisogno energetico, tutte le bobine possono essere fornite con una riduzione elettronica della potenza. La valvola può essere equipaggiata con un comando manuale per la manutenzione e la messa in servizio facilitate. Con l'utilizzo di un connettore conforme alla normativa DIN EN 17301-803 forma A, le valvole soddisfano i requisiti del grado di protezione IP65 e NEMA 4X.
- Codici prodotto
- 84818079
- Paese
- DE
Caratteristiche tecniche
Nome |
Valore |
Unità |
|---|---|---|
| Type | 6281 | |
| Operation | servo-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Rotary level | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Valve function manual actuation screw slot | Yes | |
| Flow | Above seat | |
| Nominal pressure min | 0,2 | bar |
| Nominal pressure max (liquid) | 16 | bar |
| Nominal pressure (DIN EN 1333) | PN 16 | |
| Main valve orifice 1 (P) (mm) | 13 | mm |
| Main valve orifice 1 (inch) | 1/2 inch | |
| Kv value (water) | 3,8 | m3/h |
| QNn value (gas) | 4.100 | l/min |
| Main valve wetted material | Brass | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | RC (ISO 7/1) | |
| Port connection 1 thread marking | 1/2 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | RC (ISO 7/1) | |
| Port connection 2 thread marking | 1/2 | |
| Medium-contacting part core material | Stainless steel | |
| Medium-contacting part stopper material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | NBR (Nitrile rubber) | |
| Sealing toward outside material | NBR (Nitrile rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 80 | °C |
| Voltage / rated voltage | 230 | V |
| Voltage / rated voltage | 230 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 24 | V·A |
| Rated power AC | 14 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | PA (Polyamide) | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | B | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 50 | ms |
| Switch time open max. | 1.000 | ms |
| Switch time close min | 120 | ms |
| Switch time close max. | 3.000 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 1,2 | mm |
| Pilot control seal material | NBR (Nitrile rubber) | |
| Pilot control centrally bolted | Yes | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Valve construction | Valve complete | |
| Peso | 0,52 | kg |
Combinabile con:
Applicazioni & Tools
Download
Schede tecniche
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
Tipo 6281 ficha técnica |servocontrol |válvula de membrana | 718 kB | ES |
|
|
Type 6281 data sheet | servo-assisted diaphragm valve | 2 MB | EN / EU |
|
|
Typ 6281 Datenblatt | servogesteuertes Membranventil | 2 MB | DE / DE |
|
|
Type 6281 Fiche technique |Vanne à membrane 2/2 voies pilotée | 2 MB | FR / FR |
|
|
型号 6281 参数表 | 伺服辅助式 2 位 2 通隔膜阀 | 4 MB | ZH / CN |
Manuali utente
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Istruzioni d’uso Tipo 6213 EV, 6281 EV | Valvola magnetica a 2/2 vie | 1 MB | IT / IT |
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6013 | PX011 - PX13 Use in the explosion-hazard area | 518 kB | EN,FR,DE / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 6213 6281 | 2/2-way solenoid valve | 746 kB | EN / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ 6213 6281 | 2/2-Wege-Magnetventil | 753 kB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Instrukcja obsługi Typ 6213 EV, 6281 EV | 2/2-drogowy zawórelektromagnetyczny | 1 MB | PL / PL |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de instrucciones Modelos 6213 EV, 6281 EV | Electrová | 1 MB | ES / ES |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Tipo 6213 EV, 6281 EV | Válvula solenoide 2/2 vias | 1 MB | PT / BR |
|
|
Manuel d'utilisation Type 6213 6281 | Électrovanne 2/2 voies | 763 kB | FR / FR |
|
|
Manuel d'utilisation Type AC10 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Návod k obsluze Typ 6213 EV, 6281 EV | 2/2-cestný magnetický ventil | 1 MB | CS / CZ |
|
|
使用说明书 型号 6213 EV、6281 EV | 2 位 2 通电磁阀 | 2 MB | ZH / CN |
|
|
操作手冊 6213 EV，6281 EV 型號 | 2 位2 通電磁閥 | 2 MB | ZH / HK |
|
|
操作説明書 タイプ6213 EV、6281 EV | 2/2方電磁バルブ | 1 MB | JA / JP |
Dichiarazione UE
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 3 MB | EN,FR,DE |
Modello funzionale
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
3D-Animation - 6281 | 3 MB | EN |
Flyer e cataloghi
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
723 kB | AF | |
|
|
Flyer Best Practice Safe operation with overpressure | 213 kB | EN / EU |
|
|
For stable transport of bulk materials | 635 kB | EN / EU |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |