Valvola a otturatore a 2/2 vie ad azionamento diretto
Tipo 6027 / Numero ID 277474
Descrizione del prodotto
La 6027 è una valvola a otturatore ad azionamento diretto. Per renderla più resistente alla pressione e per evitare eventuali perdite, lo stopper e il canotto sono stati saldati tra loro. Sono disponibili vari materiali di tenuta. Le bobine sono incapsulate con resina epossidica resistente agli agenti chimici. Per la riduzione del consumo elettrico durante il funzionamento sono disponibili bobine a impulso o un'elettronica "Kick and Drop" (connettore 2511). Un cuscinetto opzionale aumenta la durata della valvola quando utilizzata con i gas secchi. Per le applicazioni ad alta pressione si utilizzano guarnizioni speciali. Con l'utilizzo di un connettore conforme alla normativa DIN EN 17301-803 forma A, le valvole soddisfano i requisiti del grado di protezione IP65 e NEMA 4X.
- Codici prodotto
- 84818079
- Paese
- DE
Caratteristiche tecniche
Nome |
Valore |
Unità |
---|---|---|
Type | 6027 | |
Operation | direct-acting | |
Actuator type | Plunger valve | |
Main valve operating principle | Globe valve | |
Switch function | on/off | |
Media separation | No | |
Valve function | A - normally closed - inlet port 1 (P/NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Flow | Above seat | |
Nominal pressure min | 0 | bar |
Nominal pressure max (gas) | 100 | bar |
Nominal pressure max (liquid) | 100 | bar |
Nominal pressure (DIN EN 1333) | PN 100 | |
Main valve orifice 1 (P) (mm) | 2 | mm |
Main valve orifice 1 (inch) | 5/64 inch | |
Kv value (water) | 0,14 | m3/h |
Main valve wetted material | Stainless steel | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 1/4 | |
Port connection 2 type | Inner thread | |
Port connection 2 thread type | G | |
Port connection 2 thread marking | 1/4 | |
Valve seat material | Stainless steel | |
Seat seal material category | Plastics | |
Seat seal material | PTFE (Polytetrafluorethylene) | |
Sealing toward outside material | PEEK (Polyetheretherketone) | |
Temperature environment min | -40 | °C |
Temperature environment max | 55 | °C |
Temperature medium min | -40 | °C |
Temperature medium max | 180 | °C |
Voltage / rated voltage | 36 | V |
Voltage / rated voltage | 36 | V |
Voltage tolerance negative | 10 | % |
Voltage tolerance positive | 10 | % |
AC voltage | No | |
DC voltage | Yes | |
Battery voltage | Yes | |
Rated power DC | 21 | W |
Reduced power DC | 21 | W |
Rated power consumption | 16 | W |
Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
Electrical connection number of contacts | 2 + Grounding conductor | |
Cable plug in delivery | not included | |
Electrical connection position | in direction of flow left | |
Protection type (IP max. with suitable connector) | IP65 | |
Coil type | placed on top | |
Coil insulation material (encasement) | Epoxy | |
Coil size | 42 | mm |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | No | |
Coil wiring polarity recovery diode | No | |
Coil special feature | for high temperatures | |
Thermal insulation class of the actuator | H | |
Power reduction integrated | No | |
Nominal operation/Duty cycle | 100 | % |
Switch time open min | 20 | ms |
Switch time open max. | 30 | ms |
Switch time close min | 50 | ms |
Switch time close max. | 80 | ms |
Valve setting opening time | No | |
Valve setting closing time | No | |
Back-pressure-resistant version | No | |
Vacuum version | No | |
Analysis version | No | |
Oxygen version | No | |
Oil burner valve | No | |
Steam version | No | |
Low-noise version | No | |
Main valve with integrated screen | No | |
Installation length | 55 | mm |
Valve construction | Valve complete | |
Peso | 0,78 | kg |