Posizionatore elettropneumatico digitale per montaggio su valvole di processo
Tipo 8694 / Numero ID 227435
Descrizione del prodotto
Posizionatore compatto per il montaggio integrato su valvole di processo pneumatiche. Il valore nominale è impostato tramite segnale normalizzato 4 a 20 mA o tramite ASInterface. Un sensore senza contatto analogico rileva la posizione della valvola. Facile messa in servizio con funzione Tune automatica e impostazione mediante DIP switch: funzione cut-off, selezione della curva caratteristica, inversione della direzione di movimento, commutazione tra funzionamento manuale/automatico, ingresso binario. Ulteriori possibilità di parametrizzazione tramite dispositivi DTM. Un'interfaccia software può essere utilizzata anche per la linearizzazione della curva di funzionamento mediante curva caratteristica liberamente programmabile. La segnalazione dello stato della valvola è visualizzata tramite LED. In opzione è possibile integrare un feedback analogico della posizione.
- Codici prodotto
- 90268020
- Paese
- DE
Caratteristiche tecniche
Nome |
Valore |
Unità |
---|---|---|
Type | 8694 | |
Product sub-group | Positioner / Process Controller | |
Function | Positioner | |
Valve function manual actuation | Yes | |
Pneumatic pilot valve 1 | 6144 | |
Pneumatic function 1 double acting | No | |
Pneumatic function 1 single acting | Yes | |
Valve diameter | 2,5 | mm |
QNn value (gas) | 130 | l/min |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Displacement transducer type | internal linear | |
Displacement transducer signal | digital 14-bit | |
Positioning system with booster function | No | |
For Actuator size 40 mm | No | |
For Actuator size 50mm | No | |
For Actuator size 63mm | No | |
For Actuator size 70mm | No | |
For Actuator size 80mm | No | |
For Actuator size 90mm | No | |
For Actuator size 100mm | No | |
For Actuator size 125mm | Yes | |
For Actuator size 130mm | No | |
For Actuator size 175mm | Yes | |
For Actuator size 225mm | Yes | |
Port connection 1 type | Hose plug-in connection | |
Port connection 1 inner diameter (mm) | 6 | mm |
Port connection 1 inner diameter (inch) | 1/4 inch | |
Electrical connection sort | Screw terminal with cable feed-through | |
Voltage / rated voltage | 24 | V |
Voltage / rated voltage | 24 | V |
Supply system-internal | No | |
Supply via BUS | No | |
Supply via separating barrier | No | |
AC voltage | No | |
DC voltage | Yes | |
Input 1 type analog current | 0/4-20 | |
Input 2 type digital transistor connection NPN | No | |
Input 2 type digital transistor connection PNP | Yes | |
Output 1 type analog current | 0/4-20 mA | |
Control interface | DIP switch | |
Mounting type | CLASSIC drive | |
Protection type (IP max. with suitable connector) | IP65/67 | |
Peso | 0,460000 | kg |