Bürkert
Valvola a membrana a 2/2 vie ad azionamento pneumatico ELEMENT
Tipo 2103 / Numero ID 321083
Descrizione del prodotto
La valvola a membrana con pilota esterno tipo 2103 è costituita da un attuatore a pistone pneumatico, da una membrana e un corpo valvola a 2 vie. La guaina in acciaio inox del pregiato attuatore assicura l'impiego in condizioni ambientali igieniche o aggressive. Progettati per facilitare il flusso e realizzati senza zone morte, i corpi valvola consentono elevati valori di portata e molteplici possibilità d'impiego. La progettazione dell'attuatore è stata condotta con l'obiettivo di integrare in modo semplice le unità di automazione a tutti i livelli di espansione: dal feedback di posizione elettrico/visivo al comando pneumatico, dall'interfaccia per bus integrata fino a una variante del dispositivo con protezione antideflagrante. Il sistema altamente integrato, costituito da valvola e unità di automazione, si distingue per la compattezza e la levigatezza del design, i canali per l'aria di pilotaggio integrati, il grado di protezione IP65/67/NEMA4X e un'elevata resistenza chimica.
- Codici prodotto
- 84818087
- Paese
- DE
Caratteristiche tecniche
Nome |
Valore |
Unità |
|---|---|---|
| Type | 2103 | |
| Product sub-group | On/off valves | |
| Main valve operating principle | Diaphragm valve | |
| Valve piloting type | Pneumatic | |
| Valve construction | Valve complete | |
| Actuator version | ELEMENT | |
| Control function | A - normally closed (NC) | |
| Valve function number of switching positions | 2 | |
| Actuator size | 90 | mm |
| Actuator material | PPS (Polyphenylene sulphide) | |
| Actuator envelope material | Stainless steel | |
| Control air connection material | Plastic | |
| Control air connection type | Interface ELEMENT | |
| Control air connection diameter (mm) | 6 | mm |
| O-ring between cover and bush | No | |
| Position monitoring via magnetic piston | No | |
| Valve function manual actuation | No | |
| Additional manual actuation included | No | |
| Body nominal size | 40 | mm |
| Body nominal size (IN) | 1 1/2 inch | |
| Diaphragm coupling | Button/thread | |
| Seat seal / diaphragm material | EPDM high-temperature | |
| Fluidic port connection number | 2 | |
| Valve body material category | Plastics | |
| Valve body material | PVC (Polyvinyl chloride) | |
| Valve raw body manufacture | moulded | |
| Manufacturer´s test certificate 3.1 included | No | |
| Port connection 1 size DN | DN 40 | |
| Port connection 1 DN inch | 1,5 | Inch2 |
| Port connection 1 type | Bonded fitting | |
| Port connection 1 inner diameter (mm) | 40 | mm |
| Port connection 1 outer diameter (mm) | 50 | mm |
| Port connection 2 size DN | DN 40 | |
| Port connection 2 DN inch | 1,5 | Inch2 |
| Port connection 2 type | Bonded fitting | |
| Port connection 2 inner diameter (mm) | 40 | mm |
| Port connection 2 outer diameter (mm) | 50 | mm |
| Nominal pressure min | 0 | bar |
| Nominal pressure max | 5,5 | bar |
| Control pressure min | 5,5 | bar |
| Control pressure max | 7 | bar |
| Temperature environment min | -5 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 60 | °C |
| Kv value (water) | 30 | m3/h |
| Nominal pressure (DIN EN 1333) | PN 16 | |
| Nominal Pressure (DIN EN 1759) | Class 150 | |
| CIP capable | Yes | |
| SIP capable | Yes | |
| Position indicator | without | |
| Peso | 3,631000 | kg |
Combinabile con:
Applicazioni & Tools
Download
Schede tecniche
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with cast body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with forged body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with cast body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with forged body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with tube valve body | 2 MB | EN / EU |
|
|
Type 2XXX data sheet | accessory for pneumatic acutators CLASSIC and ELEMENT | 797 kB | EN / EU |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo de fundición] | 3 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo forjado] | 3 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo de fundición] | 2 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo forjado] | 2 MB | ES / ES |
|
|
Typ 2103 Datenblatt | pneum. betätigtes Membranventil Auf/Zu mit Rohrumformgehäuse TVB(V) | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Feingussgehäuse | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Schmiedegehäuse | 3 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Feingussgehäuse | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Schmiedegehäuse | 2 MB | DE / DE |
|
|
Typ 2XXX Datenblatt | Zubehör für pneumatische Antriebe CLASSIC und ELEMENT | 805 kB | DE / DE |
Manuali utente
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
Additional manual Type 2031 | PE05 Removing the pressure piece from diaphragm valves | 847 kB | EN,FR,DE / EU |
|
|
Additional manual Type 2100 | PX15 Use in the potentially explosive area Category 2 | 273 kB | EN,FR,DE,ML / EU |
|
|
Additional manual Type xxxx |PX51 use in the potentially explosive area Category 2 | 273 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 2103 2104 2105 | Piston-controlled diaphragm valve | 2 MB | EN / EU |
|
|
Quickstart Type 2103 2104 2105 | Piston-controlled diaphragm valve | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 2 MB | DE / DE |
|
|
Manuel d'utilisation Type 2103 2104 2105 | Vanne à membranecommandée par piston | 2 MB | FR / FR |
|
|
Quickstart Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 2 MB | DE / DE |
|
|
Quickstart Type 2103 2104 2105 | Vanne à membrane commandéepar piston | 2 MB | FR / FR |
|
|
Szybkie wprowadzenie Typ 2103, 2104, 2105 | Sterowany tłokowo zawór membranowy | 1 MB | PL / PL |
Dichiarazione UE
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 2 MB | EN,FR,DE |
Modello funzionale
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
3D-Animation - Actuator ELEMENT | 4 MB | EN |
|
|
3D-Animation - Antrieb ELEMENT | 4 MB | DE |
Flyer e cataloghi
Descrizione |
Dimens. file |
Lingua / Paese |
|
|---|---|---|---|
|
|
1 MB | IT | |
|
|
Product Overview Valvole di Processo | 4 MB | IT |
|
|
Advantages Tube Valve Body | 154 kB | EN / EU |
|
|
Diaphragm competence for hygienic applications | 1 MB | EN / EU |
|
|
Flyer Best Practice - A new formulation line for insulin vials. | 401 kB | EN / GB |
|
|
Flyer Best Practice - Diaphragm valves for an automated production line at Unither Pharmaceuticals. | 351 kB | EN / GB |
|
|
Hygienic design and precision for end products of the highest quality | 492 kB | EN / EU |